TERA-BITs Kit +PLUS -BUY & GET OFFER-
Limited Offer! FREE P320 Armorer’s TOOL with your TERA-BITs Kit +Plus Purchase!!
TERA-BITs Kit +PLUS:
When only the BEST will do…
US Mnfctrd. CARBIDE Jobbers, for JSD MUP-1
Each Bit in this Kit is US Made, Premium Carbide Steel, including 1 of each bit size needed for the P320 MUP-1 Build + the slide safety cut-out tool + TAP Magic Cutting Fluid
Carbide Material Bits make it possible to operate at higher drill speeds and resists heat better than general HSS, which helps prevent mistakenly ‘work hardening’ the fixture you are drilling. Carbide will maintain the cutting edge better for a longer working life.
9mm, 7/32”, #9, #22, #32, #39, #40 & the #40 Burring Tool for the MUP-1 slide safety cut-out
Caution/Recomendation- Carbide is a brittle material compared to High Speed Steel and Cobalt Drill Bit Materials and can break more easily during operation.
It is recomended that you only use your Carbide Drill Set with a Variable Speed DRILL PRESS as this reduces potential breakage from unstable wobble produced by hand drilling*
We also recomend purhcasing a lower cost Bit Kit so you at least have a back up set available, in the event that you break one of the Carbide Bits.
Limited Offer! FREE P320 Armorer’s TOOL with your TERA-BITs Kit +Plus Purchase!!
TERA-BITs Kit +PLUS:
When only the BEST will do…
US Mnfctrd. CARBIDE Jobbers, for JSD MUP-1
Each Bit in this Kit is US Made, Premium Carbide Steel, including 1 of each bit size needed for the P320 MUP-1 Build + the slide safety cut-out tool + TAP Magic Cutting Fluid
Carbide Material Bits make it possible to operate at higher drill speeds and resists heat better than general HSS, which helps prevent mistakenly ‘work hardening’ the fixture you are drilling. Carbide will maintain the cutting edge better for a longer working life.
9mm, 7/32”, #9, #22, #32, #39, #40 & the #40 Burring Tool for the MUP-1 slide safety cut-out
Caution/Recomendation- Carbide is a brittle material compared to High Speed Steel and Cobalt Drill Bit Materials and can break more easily during operation.
It is recomended that you only use your Carbide Drill Set with a Variable Speed DRILL PRESS as this reduces potential breakage from unstable wobble produced by hand drilling*
We also recomend purhcasing a lower cost Bit Kit so you at least have a back up set available, in the event that you break one of the Carbide Bits.
Limited Offer! FREE P320 Armorer’s TOOL with your TERA-BITs Kit +Plus Purchase!!
TERA-BITs Kit +PLUS:
When only the BEST will do…
US Mnfctrd. CARBIDE Jobbers, for JSD MUP-1
Each Bit in this Kit is US Made, Premium Carbide Steel, including 1 of each bit size needed for the P320 MUP-1 Build + the slide safety cut-out tool + TAP Magic Cutting Fluid
Carbide Material Bits make it possible to operate at higher drill speeds and resists heat better than general HSS, which helps prevent mistakenly ‘work hardening’ the fixture you are drilling. Carbide will maintain the cutting edge better for a longer working life.
9mm, 7/32”, #9, #22, #32, #39, #40 & the #40 Burring Tool for the MUP-1 slide safety cut-out
Caution/Recomendation- Carbide is a brittle material compared to High Speed Steel and Cobalt Drill Bit Materials and can break more easily during operation.
It is recomended that you only use your Carbide Drill Set with a Variable Speed DRILL PRESS as this reduces potential breakage from unstable wobble produced by hand drilling*
We also recomend purhcasing a lower cost Bit Kit so you at least have a back up set available, in the event that you break one of the Carbide Bits.
